STB Connections1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV.2. Conne
TV with VCR and Motorised System(DiSEqC 1.2)1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCA
Remote Control UnitE11
NUMERIC BUTTONSPress to select a service, enter your PIN code or numeric on the menu.INFORMATION(RED)Press to display the programme informationbox on
The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services.I-Plate
To adjust the volume level, use the buttons or buttons.To temporarily stop the volume, press the MUTE( )button.To cancel mute, pr
The select service displays the required service list which can beviewed in Simple or Advanced mode.Your STB has an Electronic Programme Guide(EPG) to
To select the desired in the service list, you should firstlydisplay the service list using OK button. Use buttons toselect a service an
1. To display the Service All, press the OK button Use RED( )button to select the All service list. 2. Select the desired service by using the
1. Press the WHITE( )button on the remote control unit to selectthe Alphabet service list.2. Use the buttons to select a service.3.
Safety... E2Copyright ...
You can watch a programme being shown and reserve it in the TV Guide mode.To enter the TV Guide modePress the EPG( )button on the remote control u
Shows the information of programmes that will be played for a week.To watch a programme you want through the display window:• Press the OK button and
You can set a parental guidance rating to each programmein this mode.1. When the OK button is pressed after selecting the highlighted parental control
This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selectingthe Installation mode in the
You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup mode and SleepTime(standby mode) can be set.
Set the video mode for the TV SCART output.Set the audio mode which is output from the TV SCARTand RCA/Cinch Jack. (Stereo/Mono)lf Dolby Digital optio
Select the OSD Transparency, Information Box Display Time and so on.Select the OSD Transparent type. It affects Information box,Soundtrack, Subtitle,
4-2. Service OrganisingThis menu gives users access to options that allow them to organise their TV Services, Radio Services and Networks.** The defau
Each of TV and Radio has four Favourite groups. Each Favourite group contains up to 100 services.Delete, Move, Lock, Skip or Rename each TV service in
The Organise Service Genre feature allows the user toDelete/Lock/Skip/Rename a service in the selected Genre.Available genre : Movie, News, Show, Spor
This STB has been manufactured to satisfy the international safety standards.Please read the following safety precautions carefully.MAINS SUPPLY : 190
The Organise Radio Services functions same as TV Services except that it uses Radio Services.You can delete or move Radio Services and change the attr
You can edit services using the network unit.• The provider names are displayed on the left side of screen,and the TV/Radio Services included in the h
4-3. Service SearchingEnter the PIN code to access the Service Searching menu as you access the Parental Control or Service Organising menu. Press th
1. Select the L.O. Frequency that is set to antenna.2. Use the buttons to select the LNB frequency(Universal,5150, 9750, 10600, 10750, 11475MHz
Service Search OSD• If you press the EXIT button during the search, then Service Search stops and the searching menu will appear.• When you find all t
Set the search parameters(Frequency, Symbol Rate, etc.) to manually find the services that you have selected in the transponder.The bar on bottom of t
Performs a manual search with the ability to enter PID(Video/Audio/PCR) values. This mode is necessary when you search for the signal that has abnorma
When you enter the Satellite Name that is set in Antenna Settingmenu, search all of the selected satellite without inputting the extrafrequency.Select
Detail ModeThe pre-fixed symbol rate list is changed according to AntennaAlternative and Satellite Name. If you want to add or change it,press the RED
4-4. StatusDisplays the information of H/W Version, S/W Version, Loader Version and CI CAM of STB and so on.• F1-5000 doesn’t support CI CAM.Shows the
GB3• VIACCESSTMis a trademark of France Telecom.• CryptoWorks(TM) is a trademark of Philips Electronics N.V.• Irdeto is a trademark of Mindport BV.
4-6. Conditional AccessThis menu allows the user to view the information on the Smart Card and Viaccess conditional access system such as general Smar
The user will select a single programme provider by selecting its distributor label and you can get the information of available entitlements.• Subscr
This menu allows the user to view the information on the Smart card and Nagravision Conditional Access system such as version and serial number of Sma
DiSEqC 1.2 User Instructions1. Satellite Setting Menu OptionsIf you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions avai
3. Initial Satellite Position Search4. Motor Limit SettingThis is required when you first set your receiver up to use DiSEqC 1.2and sets the positions
To set the West Limit:a) Select Movement and use the buttons to move your motor East or West until the motor is at the position you wish t
6. Moving to a pre-set Satellite7. Searching for services on your selected satellite8. Automatic SearchOnce you have stored the positions of the satel
Troubleshooting GuideE46
Menu MapE47
E48
E4• Antenna A device that collects and radiates electromagnetic waves. Includes a satellite dish and abroadband antenna.•Forward Error Correction(FEC
Tuner & ChannelMPEG Transport Stream A/V DecodingMemoryYou can use a special antenna switch with DiSEqC commands. When changing ASTRA1 to EUTELSAT
A/V & Data In/OutTV SCARTVCR SCARTVIDEO AUDIO R/LS/PDIF RS-232CVideo Output(CVBS, S-Video, RGB)Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms)
HOMM.10E
ReferenceGB5All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennasto be connected to the STB simultaneously.If you
E6If you are watching a programme with a Dolby Digital soundtrack(see page E14) you canenjoy the higher quality sound of the Dolby Digital audio by co
STB ConnectionsFront PanelF1-5000F1-5000 Free-To-AirCI-5100 2 Slot Common InterfaceVA-5200 2 Smart cardE7• WarningTo install the unauthorized CA
Front PanelRear PanelVACI-5300, CRCI-5500, NACI-57002 Slot Common Interface, 1 Smart card98TV LED(AMBER)The LED lights on in TV mode.RADIO LED(GREEN)T
Comments to this Manuals